1.HYDRAULIC POWER PACK UNIT – 

hydraulic power pack is a stand-alone assembly consisting of a drive motor, hydraulic pump and hydraulic fluid tank. The drive motor is connected to the hydraulic pump via a shaft and drives this. The pump is driven by the electric drive and converts the electrical energy into hydraulic energy.

2. COUNTER BALANCE VALVE –

Counterbalance valves are used to prevent oil from leaving a cylinder that is holding a load. In this, they act as adjustable pressure relief valves and are oftenly used where line pressures can spike. Essentially, in the counterbalance valve, a relief valve sets up a back-pressure in the hydraulic circuit.

3. GEAR PUMP –

A gear pump uses the meshing of gears to pump fluid by displacement. … They are one of the most common types of pumps for hydraulic fluid power applications. Gear pumps are commonly used for pumping high viscosity fluids such as oil, paints, resins or foodstuffs. They are also preferred in applications where accurate dosing or high pressure output is required

4.Agitator Blade UP Down cylinder –

An Agitator is a machine used in a tank for mixing various process media together. This Media include all liquid types, gases & solids such as salts, powders, granules and many more. In short, it works by the rotating an impeller to impart energy to the media which interact and mix.

5. Agitator UP Down cylinder seal kit –

Hydraulic cylinder seal kits are used to seal the gap between different parts of the hydraulic cylinder. Within the system, there are 2 main types of hydraulic seals India: Dynamic seals: Designed to seal various parts in relative motion.

 

6.Agitator UP Down cylinder shaft –

Agitator shaft is a rotating member which usually is of circular cross-section which is used for agitation and mixing purpose.the Elements such as impeller, coupling, bearing are mounted in the shaft.

7. Agitator UP Down cylinder ferrule fitting –

A pipe ferrule is one of the types of pipe fitting which are manufactured by using various materials. A pipe ferrule includes a circular clamp which to connect together and join wires, fibers, or posts. It is a type of ring or cap that is connected to an object to protect from splitting, damage, or wear.

8. PRODUCT DISCHARGE CYLINDER – 

A two-cylinder discharge for a storage silo for farinaceous bulk goods. The discharge includes a discharge hopper and at least two discharge cylinders which are supported so as to be rotatable in the discharge hopper. The two discharge cylinders include a plurality of discharge chambers arranged in a circumferential direction of the cylinders. A gap exists between the discharge chambers and guide walls of the silo.

9. Product Discharge cylinder seal kit –

Megnive Hydraulics is involved in manufacturing a huge compilation of Concrete Pump Spare, Hydraulic Cylinder Seal Kit, Hydraulic Cylinders and Hydraulic Power Pack. Manufactured making use of supreme in class material and progressive tools; these are in conformism with the norms defined by the market

10. Product Discharge cylinder shaft – 

Discharge Systems are used to discharge viscous non-flowable materials from the vessel of a Change Can Mixer. A discharge platen, which is lowered by means of a hydraulic cylinder pushes out the contents of the vessel through a discharge valve which is normally located in the bottom of the mix vessel.

11. Product Discharge cylinder ferrule
fitting –

A pipe ferrule is one of the types of pipe fitting which are manufactured by using various materials. … A pipe ferrule includes a circular clamp to connect together and join wires, fibers, or posts. It is a type of ring or cap that is connected to an object to protect from splitting, damage, or wear.

12. Product Discharge cylinder plug
mounting Nut –

An extremely strong and rigid mount which reduces the effective length of the piston rod to that of the rod open length plus the distance from the gland to the front foot. Good for sheave block applications as long as the sheave block is guided.

13. Product Discharge O Ring silicon – 

Silicone o-rings are excellent seal materials for static, high temperature applications. Featuring outstanding flex and fatigue life, ozone and UV radiation resistance, physiologically neutral and insulating properties, silicone o-rings are effective in a wide range of applications.

14. Mechanical seal –

A mechanical seal is simply a method of containing fluid within a vessel (typically pumps, mixers, etc.) where a rotating shaft passes through a stationary housing or occasionally, where the housing rotates around the shaft.

15. Shaft bellow –

A shaft coupling is a device used to join two shafts for the purpose of transmitting power and/or rotational motion, and may be designed to permit some degree of parallel, axial, or angular misalignment.

16. Agitator hollow Blade – 

The Pitch Blade Turbine impeller is one of the most widely used impellers and one of the oldest designs of the mixing industry. … While useful in most applications, this design excels in aggressive mixing requiring high power input per volume as well as flow.

17. Agitator hollow shaft –

Agitator shaft is a rotating member usually of circular cross-section which is used for agitation or mixing purpose. Elements such as impeller, coupling, bearing are mounted on the shaft. 

18. Agitator hollow shaft Rotary
union – 

A rotary union allows for the movement of a fluid media oil, coolant, water this from a stationary device that sink, an oil tank, a vat into a moving device engine, propeller, turbine and many others.

19. P.P Filter cloth –

Polypropylene filter cloth, also known as PP filter cloth, finds application in liquid-solid filtration on account of high resistance to most acids and alkalis. This woven fiber is widely chosen for its lightness, high strength and excellent resistance to most acids and alkalis.

20. Filter cloth fitting segment Patti –

Filter cloth in the form of tube or long bags is used to filter particulates as small as 1 millimeter out of an exhaust gas. The bag material can vary significantly and include natural or synthetic materials.

 

21.Filter cloth fitting bolt –

Filter cloth in the form of tube or long bags is used to filter particulates as small as 1 millimeter out of an exhaust gas. The bag material can vary significantly and include natural or synthetic materials.

 

22. Perforated plate set –

Perforated metal can be used for structural and decorative applications in architecture and design, including balustrades, facades, stairs and screens, and its characteristics allow for creativity with light, sound and visual depth. Perforated metal can be used to regulate light and ventilation within a space.

23. Product Sampling valve – 

A sampling valve is a type of valve used in process industries that allows taking a representative portion of a fluid gases, liquids, fluidized, solids, or slurries to test it by all the physical measurements, chemical analysis, microbiological examination typically for the purposes of identification and quality control.
 

24.Gear box – 

Gear boxes are simply refered to as a set of gears and their casing, they are most commonly found in automobiles. this are used to transfer energy from one rotating power source to another and can be found in automobiles, turbines, and heavy machinery.

25. AGITATED NUTSCHE FILTER AND DRYER 12 KL – 

The Agitated Nutsche Filter is a closed vessel that uses filtration under pressure or vacuum to isolate solids from liquids. The closed system maintains product quality and hygiene by providing odourless, contamination-free, and non-polluting working conditions.